Seismic Refraction Modeling Using Finite Difference Method and its Implications in the Understanding of the First Arrivals

Y. P. Goyes, S. Khurama, G. Reina, G. Jimenez

Abstract


This paper presents the results of the seismic refraction modeling using finite differences method  (FDM), implemented in the program from the open source package Seismic Unix (SUFDMOD2), and its comparison with the modeling by time-term method (TTM) from the SEISIMAGER© software. The applied velocity model corresponds to the typical measurements situation in a seismic refraction survey. The depth of refraction interfaces varies approximately from 2 to 6 meters, thus allowing examining the propagation of head waves with the variable dip angles. The synthetic seismograms allow us identifying the first arrivals of head waves, which are subsequently the travel-time curves. The analysis of results obtained with FDM and TTM algorithms shows a high correlation with the refraction arrival times, but a low correlation with the arrival times of the direct wave. Finally, the obtained results allow concluding that the seismic modeling of the propagation of head waves using the method of finite differences makes it possible to accurately determine the first arrival time within the complex geological conditions and the velocity dispersion between the layers. The goal of this work is to show how these findings can be applied to seismic modeling by the method of finite differences for calculation of the first arrival time and clarify the results of measurements conducted in real conditions.

Keywords


seismic modeling; seismic refraction; time-term inversion; finite differences; travel time curve; first arrival time; Seismic Unix

References


Båth M. 1978. An analysis of the time term method in refraction seismology. Tectonophysics. 51(3–4):155-169. doi:10. 1016/0040-1951(78)90238-X

Berry M.J., West G.F. 1966. An interpretation of the first arrival data of the Lake Superior experiment by the time-term method, Bull. Seism. Soc. Am., 56:141– 171.

Bridle R. 2016.Introduction to this special section: Near-surface modeling and imaging. The Leading Edge. 35(11):938939. doi:10.1190/tle35110938.1

Budhu M. 2010. Soil mechanics and foundation. John Wiley & Sons. p. 781.

Dobrin M.B., 1976. Introduction to Geophysical Prospecting, p. 629.

Iwasaki T. 2002. Extended time-term method for identifying lateral structural variations from seismic refraction data. Earth Planets Space. 54:663–677. doi: 10.1186/BF03351718

Lankston R.W.1988. High Resolution Refraction Data Acquisition and Interpretation. Symposium on the Application of Geophysics to Engineering and Environmental Problems. pp. 349-408.doi: 10.4133/1.2921806

Redpath B. 1973. Seismic refraction exploration for engineering site investigations. Technical Report E-73-4 U.S. Army Corps of Engineers Explosive Excavation Research Laboratory, Livermore, California. p. 55.

Sayers C., Chopra S. 2009. Introduction to special section: Seismic modeling. The Leading Edge, 28:528-529. doi: 10.1190/1.3124926

Slawinski L.R., Bording R.P., 1999. A recipe for stability of finite-difference waveequation computations. Geophysics. 64:967–969.

Stockwell Jr.J.W. 1999. The CWP/SU: Seismic Un*x Package, Computers and Geosciences, 25(4): 415 – 419. doi: 10.1016/S0098-3004(98)00145-9




DOI: http://dx.doi.org/10.17072/psu.geol.16.3.256

Refbacks

  • There are currently no refbacks.