Using a 3D Modelling to Calculate the Volumes of Overburden Rocks and Minerals

A. K. Alvanyan, M. V. Ovsyannikov

Abstract


The volumes of overburden rocks and minerals were calculated based on the 3D model of the deposit, which was created using results of analysis of the geological structure of the deposit, and construction of the topographic surface. A comparative table of the results of calculating the volumes of overburden rocks and minerals was compiled using the method of geological blocks and 3D models.


Keywords


Deposit; overburden rocks; mineral; lithological section; three-dimensional graphics; digital model; 3D model of topographic surface

References


Alvanyan A.K., Iblaminov R.G. 2009. To the question of the methodology of exploration of clay deposits (on the example of the Ust-Igumskoye field in the Perm Region). Bulletin of Perm University. Geology. Perm. Issue 11(37). pp. 27-35. (in Russian)

Alvanyan A.K., Iblaminov R.G., Kotelnikov P.O. 2010. On the issue of the revision of the reserves of the Vsevolod-Vilvenskoye limestone deposit (Alexandrovsky district, Perm Krai). Problems of mineralogy, petrography and metallogeny. Scientific readings in memory of Chervinsky. Vol. 13. Perm. univ., pp. 251-260. (in Russian)

Pogorelov V.I., 2007. AutoCAD 2007, Three-dimensional modeling. (in Russian)

Poleshchuk N.N. 2007. AutoCAD 2007. 2D/3D modeling, p. 416. (in Russian)

Pelevina I.A., 2011. Tutorial AutoCAD Civil 3D 2011, p. 416. (in Russian)




DOI: http://dx.doi.org/10.17072/psu.geol.%2020.4.355

Refbacks

  • There are currently no refbacks.