Method of the Material Stress Assessment Using the Infrared Thermography

V V Seredin, A S Khrulev

Abstract


The solution of a number of geological and engineering problems require knowledge of the stress state of the structural member material. Non-destructive testing methods are used to evaluate the stress state of materials. They are based on such criteria as sound pressure, temperature, ultrasound wave’s characteristics etc., as well as methods evaluating the stress state of the material after destruction. Development of methods of this group is caused by insufficient reliability of theoretical modelling not providing in some case stability of engineering facilities in practice. To avoid the emergencies, it is important to obtain the information on the actual load (stress) at which the structure destruction occurred. These methods are especially important as a tool for experts identifying the cause of the accidents at engineering facilities. Additionally, this information will provide a correction of calculation models improving the safe exploitation of facilities. The aim of this study was to develop a method of materials stress state assessment using an infrared thermography data. Experimental studies showed that there exists a relationship between the temperature on the surface of material displacement and the normal stress affecting the area of failure. The temperature on the surface of material increases with an increase in normal stress in a fracture area. On a basis of the revealed relationship, a method of determination of the material stress state using the infrared thermography data was worked out.


Keywords


stress state of material; infrared thermography; main crack; uniaxial compression; stability of engineering structures

References


Blokhin D.I. 2005. Metodika otsenki «bystroprotekayuschikh» izmeneniy napryazhennogo sostoyaniya gruntov i gornykh porod po dannym infrakrasnoy (IR-) radiometrii [Methodology of assessment of fast changes of soil and rock stress conditions using infrared thermography data]. Avtoreferat of Diss. Kand. Sci., Moskva, p. 12. (in Russian)

Voznesenskiy A.S., Ustinov K.B., Shkuratnik V.L. 2006. Teoreticheskaya model akusticheskoy emissii pri mekhanicheskom nagruzhenii gornykh porod v oblasti maksimalnogo uplotneniya [The theoretical model of acoustic emission under the mechanical loading of rocks in the area of maximum compaction]. Journal of Applied Mechanics and Technical Physics. 47(4):145-152. (in Russian)

Konoplev A.V., Krasilnikov P.A. 2012. A Technique for mapping territorial combinations of Natural resources and their comprehensive assessment by a Gis Tecynology. Geography and Natural Resources, 33(1):83–86. (in Russian)

Krasilnikov P.A., Seredin V.V., Leonovich M.F. 2015. Issledovanie raspredeleniya uglevodorodov po razrezu gruntovogo massiva [Investigation of the distribution of hydrocarbons into the cross-section of ground mass]. Basic research, 2-14, pp. 3100-3104. (in Russian)

Kuznetsov F.M., Kozlov A.P., Seredin V.V., Pimenova E.V. 2003. Rekultivatsiya neftezagryaznennykh pochv [Remediation of oil-contaminated soils]. Textbook. Publishing house of Perm State Technical University, Perm, p. 198. (in Russian)

Oparin V.N., Yakovitskaya G.E., Vostretsov A.G., Seryakov V.N., Krivetsky A.V. 2013. O koeffitsiente mekhano-elektromagnitnykh preobrazovaniy pri razrushenii obraztsov gornykh porod [On the coefficient of mechanical-electromagnetic alteration during the destruction of rock samples]. Physical and technical problems of mining, 3:3-20. (in Russian)

Seredin V.V. 2014. Issledovanie temperatury porod v zone treshchiny razrusheniya [Study of the rocks temperature in the area of the brittle fracture]. Basic Researches, 9-12, pp. 2713-2717. (in Russian)

Seredin V.V. 1985. Sposob postroeniya pasportov prochnosti gornykh porod [The method of obtaining the certificate of rock strength]. Physical and technical problems of mining, 4:110-111. (in Russian)

Seredin V.V., Laptev B.V. Sposob opredeleniya napryazhennogo sostoyaniya materiala [Method of determination of the stress state of the material]. Invention certificate 1173244 USSR, Bull. No. 30, p. 3.

Seredin V.V., Kopylov I.S., Khrulev A.S., Leibovich L.O., Pushkareva M.V. 2013. Evolution of fracture surface morphology in rocks. Journal of Mining Science, 49(3):409–412.

Chikov B.M. 2010. Problemy geologicheskoy interpretatsii seysmoochagovykh sistem zemnoy kory (geomekhanika i tektonofizicheskiy analiz) [Problems of geological interpretation of seismic focal systems of the Earth crust (geomechanics and tectonophysical analysis)] Geodynamics and Tectonophysics, 3:231-248. (in Russian)




DOI: http://dx.doi.org/10.17072/psu.geol.28.28

Refbacks

  • There are currently no refbacks.